Drilling Tool Station Mg B : search results

MicroStep offers variety of drilling and tapping tool stations for several machine types reaching from small drilling heads for soft sandwich materials to big drilling and tapping units with internal cooling and possibility of automatic tool change. Technical parameters: MG-40-P26 Max. thickness ... ... Spindle power 26, 8 kW Spindle revolutions 1829 rpm Drilling Ø 4-40 mm Tapping M4-M33 Taper type ...

MicroStep offers variety of drilling and tapping tool stations for several machine types reaching from small drilling heads for soft sandwich materials to big drilling and tapping units with internal cooling and possibility of automatic tool change. Technical parameters: Drilling tool station DRM-B 55 kW Spindle power 55 kW Spindle revolutions 6000 rpm Drilling up to Ø 60 mm Tapping up to M30 Taper ...

The drilling tool station is designed to perform drilling of holes, taping and countersinking on MSF laser ... ... a strong 21 kW direct drive spindle to provide proper drilling power for small to medium drilling diameter tasks up to Ø30 mm and at the same ... ... to M24 and countersinking. Optionally, the tool station is able to perform small milling operations (slot milling, ... ... 10 000 rpm Taper type (tool ...

The drilling head MSF-15-P5-Turret is designed to perform drilling of holes, taping and countersinking by a multi-spindle ... ... equipped with a 5 kW spindle motor to provide proper drilling power for small to medium drilling diameter tasks up to Ø15 mm and at the same ... ... 000 rpm Taper type (tool holder) COLLET – ER 32 Tool change Automatic – Turret head Tool length calibration Yes – Automatic  Tool ...

A standard tool station used for straight (vertical) cutting. ...

A standard tool station used for straight (vertical) cutting. A standard tool station used for straight (vertical) cutting. Technical parametrs Degrees of freedom 2 (Y and Z axes) + X on the machine Max. thickness of material acording to a plasma source (max. 100 mm) Total stroke (Z) 195 - 350 mm Positioning ... ... stroke etc. ) vary with the machine type the tool station is installed upon. ...

A standard tool station used for straight (vertical) cutting. A standard tool station used for straight (vertical) cutting. Technical parameters Degrees of freedom  2 (Y and Z axes) + X on the machine Max. thickness of material 150 mm Total stroke (Z) 250 mm Positioning speed in Y max. 55 m/min Positioning speed in Z max. 40 m/min ...

A standard tool station used for straight (vertical) cutting. A standard tool station used for straight (vertical) cutting. Technical parametrs Degrees of freedom 2 (Y and Z axes) + X on the machine Max. thickness of material 100 - 300 mm Total stroke (Z) 200 - 365 mm Positioning speed in Y max. 40 m/min Positioning ... ... stroke etc. ) vary with the machine type the tool station is installed upon. ...

Tilting tool station enables automatic setting of the torch's tilt for bevel cutting ... ... plasma in the longitudinal direction (X axis). Tilting tool station enables automatic setting of the torch's tilt for bevel cutting ... ... direction (X axis). A manual version of this tool station (manual setting of torch inclination) is also available. ... ... stroke etc. ) vary with the machine type the tool station is ...

This tool station with up to 4 cutting nozzles is designed for simultaneous cutting of identical parts with waterjet technology. This tool station with up to 4 cutting nozzles is designed for simultaneous cutting of identical parts with waterjet technology. Technical parameters Degrees of freedom 2 (Y and Z) + ... ... stroke etc. ) vary with the machine type the tool station is installed upon. ...

The 3D tilting tool station enables bevel cutting into plates for a variety of applications. Watch the machine cut a common part accurately and efficiently. With the use of our unique patented technology ACTG® a long term accuracy of cutting is easily maintained. ...

This plasma tool station is used for plasma cutting on our waterjet cutting machine AquaCut. This plasma tool station is used for plasma cutting on our waterjet cutting machine AquaCut. The plasma tool station has a special cover for the plasma head as a protection against splashing water from the waterjet cutting ... ... stroke etc. ) vary with the machine type the tool station is installed upon. ...

This tool station with a fork-type torch is intended for cutting stripes with oxyfuel torches in the width range of 70 – 150 mm. It is equipped with an anti-collision protection system and igniter for each torch. Technical parameters Degrees of freedom  2 (Y and Z) + X on the machine Max. thickness of ... ... stroke etc. ) vary with the machine type the tool station is installed upon. ...

 Designed for 3D CNC milling of mild metals, plastics and wood by means of high-revolution spindles. Type of spindle is determined according to the application. ...

The 3D tilting plasma tool station enables bevel cutting with possibility of tilting up to 50°. The 3D tilting plasma tool station enables bevel cutting with possibility of tilting up to 50°. The plasma torch is fixed in an anti-collision holder. Technical parameters Degrees of freedom 4 (Y, Z, A and B ... ... stroke etc. ) vary with the machine type the tool station is installed upon. ...

Multi-talented: One machine for every task. Bevel cutting, drilling, marking of sheets, pipes, profiles and domes, all with one machine? MicroStep´s MG line is the ultimate cutting all-rounder, offering versatile processing options for a wide range of materials. ...

This tool station for oxyfuel bevel cutting with continuous rotation allows contour bevel cutting with no cable "un-wrap" cycle required. It enables cutting of K-, V- and Y-cuts in one go. This tool station for oxyfuel bevel cutting with continuous rotation allows contour bevel cutting with no cable "un-wrap" ... ... stroke etc. ) vary with the machine type the tool station is installed upon. ...

MicroStep  MG  machines are suitable for a variety of applications from straight and bevel cutting with plasma and oxyfuel, pipe & profile cutting, dome cutting,  milling, drilling, tapping and countersinking to marking and additional beveling with ABP technology. ...

A complex cutting machine performs drilling, tapping, countersinking, plasma punching, plasma marking and, of course, different kinds of plasma bevel cutting – Y cut, top-bevel, bottom-bevel, variable bevel. Sharp corners of parts are achieved thanks to corner loops. Furthermore, ... ... pipes, rectangular profiles and even domes. MG is the ultimate cutting all-rounder. ...